Comunicación robot Kuka con PLC Siemens

Último Mensaje

RSS

David

(@david)

Active Member

Registrado: hace 6 años

Respuestas: 14

9 junio, 2018 11:14

Hola,

Me gustaría ver si me podéis ayudar. Me están pidiendo desde un centro de formación profesional, a ver si les puedo ayudar a comunicar un PLC de Siemens con un robot Kuka que tienen allí, ya que llevan mucho tiempo intentándolo y no son capaces.

Yo nunca he hecho una comunicación entre un robot y un PLC.

Podríais decirme los pasos necesarios tanto en el PLC como en el Robot? Si no es mucha molestia?

Gracias, un saludo

Citar

David Ibáñez

(@admnove19)

Miembro Admin

Registrado: hace 7 años

Respuestas: 15

9 junio, 2018 11:22

Buenos días David,

Previamente necesitaría de alguna información adicional:

¿Que tipo de controladora tienen KRC2 o KRC4?
¿Qué tipo de comunicación queréis utilizar? (Yo te recomendaría utilizar Profinet):

1. Profibús
2. Profinet
3. TCP/IP

¿Dispone el robot de los drivers (tecnología) para esta comunicación?

1. Profinet y TCP/IP: KUKA.Ethernet KRL
2. Profibus: Opción instalable en controladora.

¿De que modelo de PLC disponen?
¿El plc dispone de la interfaz de comunicación necesaria?

1. Profibus Master
2. Profinet Master
3. Puerto ethernet

Saludos,

ResponderCitar

David

(@david)

Active Member

Registrado: hace 6 años

Respuestas: 14

10 junio, 2018 10:16

Hola, te digo las características que me pides:

1. Controlador: KRC4 COMPACT

2. Profinet

3. Dispone de drivers: Profinet y TCP/IP: KUKA.Ethernet KRL

4. PLC Siemens: S7 1200 AC/DC/RLY FIRMWARE 3.0

5. Interfaz de comunicación PLC: Profinet Master

Gracias 🙂

ResponderCitar

David Ibáñez

(@admnove19)

Miembro Admin

Registrado: hace 7 años

Respuestas: 15

10 junio, 2018 10:47

Buenas David,

Ok.

Entiendo entonces que la controladora también dispone de la opción: KUKA.ProfiNet Controller / Device.

Te paso un manual de Kuka donde lo explica bastante bien.

Un saludo

KUKA_ProfiNet_31_en.pdf

ResponderCitar

RE: Motor monofásico con condesador entre fases

Hola! también tuve ese mismo problema. Pero en mi caso ...

Por yuri.astete, hace 4 años
RE: alarma de proximidad

Hola! primero tendrías que definir qué señal quieres en...

Por yuri.astete, hace 4 años
RE: alarma de proximidad

Hola compañero, Existen muchos tipos de sensores de pro...

Por tmm, hace 4 años
Medida de corrientes de control con pinza amperimetrica

Alguien ha utilizado alguna vez una pinza de estas para...

Por Electrobom, hace 4 años
RE: Motor monofásico con condesador entre fases

Un amigo tenia un problema similar, y me ha dicho que l...

Por bmindiola, hace 4 años
RE: Diferencial superinmunizado, como reconocerlo

Gracias Maxi, muy interesante. Sabes si hay mucha difer...

Por David, hace 4 años
Diferencial superinmunizado, como reconocerlo

Saludos a todos, foreros de novaut! Me gustaría estre...

Por Maximiliano Peñafiel, hace 4 años
RE: Ayuda con interpretación de sistema

@j-r Si no lo has resuelto, que quede para futuras cons...

Por Maximiliano Peñafiel, hace 4 años
RE: Implementar tecnología inalámbrica de asistencia sanitaria (sensores) en drones de rescate.

Como han comentado antes la tecnología de reconocimient...

Por Maximiliano Peñafiel, hace 4 años

Super Globals

Requests: Array ( )

Server: Array ( )

Options and Features

permastruct: foro
use_home_url: 0
url: https://novedadesautomatizacion.com/foro/
Array
(
    [title] => Novedades Automatización Foro
    [description] => Novedades Automatización General
    [lang] => 1
    [menu_position] => 23
)
pageid:1006
default_groupid: 3
Array
(
    [layout_extended_intro_topics_toggle] => 1
    [layout_extended_intro_topics_count] => 5
    [layout_extended_intro_topics_length] => 45
    [layout_qa_intro_topics_toggle] => 1
    [layout_qa_intro_topics_count] => 3
    [layout_qa_intro_topics_length] => 90
    [layout_threaded_intro_topics_toggle] => 0
    [layout_threaded_intro_topics_count] => 10
    [layout_threaded_intro_topics_length] => 0
    [layout_threaded_filter_buttons] => 1
    [layout_threaded_add_topic_button] => 1
    [display_current_viewers] => 1
)
Array
(
    [layout_extended_intro_posts_toggle] => 1
    [layout_extended_intro_posts_count] => 4
    [layout_extended_intro_posts_length] => 50
    [recent_posts_type] => topics
    [tags] => 1
    [max_tags] => 5
    [tags_per_page] => 100
    [topics_per_page] => 10
    [edit_topic] => 1
    [edit_post] => 1
    [eot_durr] => 300
    [dot_durr] => 300
    [posts_per_page] => 15
    [layout_threaded_posts_per_page] => 5
    [layout_qa_posts_per_page] => 15
    [layout_qa_comments_limit_count] => 3
    [layout_qa_first_post_reply] => 1
    [layout_threaded_nesting_level] => 5
    [layout_threaded_first_post_reply] => 0
    [eor_durr] => 300
    [dor_durr] => 300
    [max_upload_size] => 10485760
    [display_current_viewers] => 1
    [display_recent_viewers] => 1
    [display_admin_viewers] => 1
    [union_first_post] => Array
        (
            [1] => 0
            [2] => 0
            [3] => 1
            [4] => 0
        )

[attach_cant_view_msg] => No tienes permiso para ver el archivo adjunto
    [search_max_results] => 100
    [topic_body_min_length] => 2
    [topic_body_max_length] => 0
    [post_body_min_length] => 2
    [post_body_max_length] => 0
    [comment_body_min_length] => 2
    [comment_body_max_length] => 0
)
Array
(
    [custom_title_is_on] => 1
    [default_title] => Member
    [members_per_page] => 15
    [online_status_timeout] => 240
    [url_structure] => nicename
    [search_type] => search
    [login_url] => 
    [register_url] => 
    [lost_password_url] => 
    [redirect_url_after_login] => 
    [redirect_url_after_register] => 
    [redirect_url_after_confirm_sbscrb] => 
    [rating_title_ug] => Array
        (
            [5] => 1
            [4] => 1
            [3] => 1
        )

[rating_badge_ug] => Array
        (
            [1] => 1
            [5] => 1
            [4] => 1
            [2] => 1
            [3] => 1
        )

[title_usergroup] => Array
        (
            [1] => 1
            [5] => 1
            [4] => 1
            [2] => 1
        )

[title_second_usergroup] => Array
        (
            [1] => 0
            [5] => 0
            [4] => 0
            [2] => 0
            [3] => 1
        )

[rating] => Array
        (
            [0] => Array
                (
                    [points] => 0
                    [title] => New Member
                    [color] => #d2d2d2
                    [icon] => far fa-star-half
                )

[1] => Array
                (
                    [points] => 5
                    [title] => Active Member
                    [color] => #4dca5c
                    [icon] => fas fa-star
                )

[2] => Array
                (
                    [points] => 20
                    [title] => Eminent Member
                    [color] => #4dca5c
                    [icon] => fas fa-star
                )

[3] => Array
                (
                    [points] => 50
                    [title] => Trusted Member
                    [color] => #4dca5c
                    [icon] => fas fa-star
                )

[4] => Array
                (
                    [points] => 100
                    [title] => Estimable Member
                    [color] => #4dca5c
                    [icon] => fas fa-star
                )

[5] => Array
                (
                    [points] => 250
                    [title] => Reputable Member
                    [color] => #4dca5c
                    [icon] => fas fa-star
                )

[6] => Array
                (
                    [points] => 500
                    [title] => Honorable Member
                    [color] => #e5d600
                    [icon] => fas fa-certificate
                )

[7] => Array
                (
                    [points] => 750
                    [title] => Prominent Member
                    [color] => #e5d600
                    [icon] => fas fa-certificate
                )

[8] => Array
                (
                    [points] => 1000
                    [title] => Noble Member
                    [color] => #e5d600
                    [icon] => fas fa-certificate
                )

[9] => Array
                (
                    [points] => 2500
                    [title] => Famed Member
                    [color] => #ff812d
                    [icon] => fas fa-shield-alt
                )

[10] => Array
                (
                    [points] => 5000
                    [title] => Illustrious Member
                    [color] => #e04a47
                    [icon] => fas fa-trophy
                )

)

)
Array
(
    [from_name] => Novedades Automatización - Foro
    [from_email] => news@novedadesautomatizacion.com
    [admin_emails] => news@novedadesautomatizacion.com
    [new_topic_notify] => 1
    [new_reply_notify] => 1
    [confirmation_email_subject] => Please confirm subscription to [entry_title]
    [confirmation_email_message] => Hello [member_name]!
Thank you for subscribing.
This is an automated response.
We are glad to inform you that after confirmation you will get updates from - [entry_title].
Please click on link below to complete this step.
[confirm_link]
    [new_topic_notification_email_subject] => New Topic
    [new_topic_notification_email_message] => Hello [member_name]!
New topic has been created on your subscribed forum - [forum].

[topic_title]
<blockquote>[topic_desc]</blockquote>

<hr />

If you want to unsubscribe from this forum please use the link below.
[unsubscribe_link]
    [new_post_notification_email_subject] => New Reply
    [new_post_notification_email_message] => Hello [member_name]!
New reply has been posted on your subscribed topic - [topic].

[reply_title]
<blockquote>[reply_desc]</blockquote>

<hr />

If you want to unsubscribe from this topic please use the link below.
[unsubscribe_link]
 [report_email_subject] => Forum Post Report
 [report_email_message] => Report details:
Reporter: [reporter],
Message: [message],

[post_url]
    [wp_new_user_notification_email_admin_subject] => [blogname] New User Registration
    [wp_new_user_notification_email_admin_message] => New user registration on your site [blogname]:

Username: [user_login]

Email: [user_email]
    [wp_new_user_notification_email_subject] => [blogname] Your username and password info
    [wp_new_user_notification_email_message] => Username: [user_login]

To set your password, visit the following address:

[set_password_url]
    [reset_password_email_message] => Hello!

You asked us to reset your password for your account using the email address [user_login].

If this was a mistake, or you didn\'t ask for a password reset, just ignore this email and nothing will happen.

To reset your password, visit the following address:

[reset_password_url]

Thanks!
    [update] => 1
    [user_mention_notify] => 1
    [user_mention_email_subject] => You have been mentioned in forum post
    [user_mention_email_message] => Hi [mentioned-user-name]!
You have been mentioned in a post on \"[topic-title]\" by [author-user-name].

[4] => Array
                (
                    [id] => 4
                    [name] => Threaded
                    [version] => 1.0.0
                    [description] => Threaded layout turns your forum to a threads list accented on discussion tree view.
                    [author] => gVectors Team
                    [url] => http://gvectors.com/
                    [file] => classic/layouts/4/forum-sub.php
                )

[2] => Array
                (
                    [id] => 2
                    [name] => Simplified
                    [version] => 1.0.0
                    [description] => Simplified layout looks simple and clean.
                    [author] => gVectors Team
                    [url] => http://gvectors.com/
                    [file] => classic/layouts/2/forum.php
                )

[3] => Array
                (
                    [id] => 3
                    [name] => QA
                    [version] => 1.0.0
                    [description] => Q&A Layout turns your forum to a powerful question and answer discussion board.
                    [author] => gVectors Team
                    [url] => http://gvectors.com/
                    [file] => classic/layouts/3/forum.php
                )

)

[style] => default
    [styles] => Array
        (
            [default] => Array
                (
                    [0] => #000000
                    [1] => #FFFFFF
                    [2] => #333333
                    [3] => #333f49
                    [4] => #333f49
                    [5] => #333f49
                    [6] => #999999
                    [7] => #CCCCCC
                    [8] => #E6E6E6
                    [9] => #F5F5F5
                    [10] => #DADADA
                    [11] => #00AAE1
                    [12] => #00AAE1
                    [13] => #00AAE1
                    [14] => #00AAE1
                    [15] => #00AAE1
                    [16] => #00AAE1
                    [17] => #DFF4FF
                    [20] => #FF812D
                    [30] => #4DCA5C
                    [31] => #00A636
                    [32] => #86BA4C
                    [33] => #6FA634
                    [40] => #FF9595
                    [41] => #FF7575
                    [42] => #F46464
                )

[red] => Array
                (
                    [0] => #000000
                    [1] => #ffffff
                    [2] => #333333
                    [3] => #555555
                    [4] => #666666
                    [5] => #777777
                    [6] => #999999
                    [7] => #cccccc
                    [8] => #e6e6e6
                    [9] => #f5f5f5
                    [10] => #dadada
                    [11] => #e0141e
                    [12] => #ee1a26
                    [13] => #fc979c
                    [14] => #e0141e
                    [15] => #99262b
                    [16] => #d61319
                    [17] => #fff7f7
                    [20] => #30b2a7
                    [30] => #4dca5c
                    [31] => #00a636
                    [32] => #86ba4c
                    [33] => #6fa634
                    [40] => #ff9595
                    [41] => #ff7575
                    [42] => #f46464
                )

[green] => Array
                (
                    [0] => #000000
                    [1] => #ffffff
                    [2] => #333333
                    [3] => #555555
                    [4] => #666666
                    [5] => #777777
                    [6] => #999999
                    [7] => #cccccc
                    [8] => #e6e6e6
                    [9] => #f5f5f5
                    [10] => #dadada
                    [11] => #6ea500
                    [12] => #649e2d
                    [13] => #8dce0c
                    [14] => #447714
                    [15] => #5a7f10
                    [16] => #6ea500
                    [17] => #f8fcef
                    [20] => #ff812d
                    [30] => #4dca5c
                    [31] => #00a636
                    [32] => #ff812d
                    [33] => #f47222
                    [40] => #ff9595
                    [41] => #ff7575
                    [42] => #f46464
                )

[orange] => Array
                (
                    [0] => #000000
                    [1] => #ffffff
                    [2] => #333333
                    [3] => #555555
                    [4] => #666666
                    [5] => #777777
                    [6] => #999999
                    [7] => #cccccc
                    [8] => #e6e6e6
                    [9] => #f5f5f5
                    [10] => #dadada
                    [11] => #e0762f
                    [12] => #ff6600
                    [13] => #fc9958
                    [14] => #f26000
                    [15] => #aa4f12
                    [16] => #f26000
                    [17] => #fff4ed
                    [20] => #ff812d
                    [30] => #4dca5c
                    [31] => #00a636
                    [32] => #86ba4c
                    [33] => #6fa634
                    [40] => #ff9595
                    [41] => #ff7575
                    [42] => #f46464
                )

[grey] => Array
                (
                    [0] => #000000
                    [1] => #ffffff
                    [2] => #333333
                    [3] => #343434
                    [4] => #666666
                    [5] => #777777
                    [6] => #999999
                    [7] => #cccccc
                    [8] => #e6e6e6
                    [9] => #f5f5f5
                    [10] => #dadada
                    [11] => #888888
                    [12] => #666666
                    [13] => #7eea8d
                    [14] => #777777
                    [15] => #333333
                    [16] => #555555
                    [17] => #dff4ff
                    [20] => #ff812d
                    [30] => #4dca5c
                    [31] => #00a636
                    [32] => #86ba4c
                    [33] => #6fa634
                    [40] => #ff9595
                    [41] => #ff7575
                    [42] => #f46464
                )

[dark] => Array
                (
                    [0] => #000000
                    [1] => #141414
                    [2] => #bbbbbb
                    [3] => #000000
                    [4] => #666666
                    [5] => #bcbcbc
                    [6] => #999999
                    [7] => #585858
                    [8] => #727272
                    [9] => #323232
                    [10] => #dadada
                    [11] => #888888
                    [12] => #33779b
                    [13] => #7eea8d
                    [14] => #777777
                    [15] => #e0e0e0
                    [16] => #cecece
                    [17] => #33779b
                    [20] => #ff812d
                    [30] => #4dca5c
                    [31] => #00a636
                    [32] => #86ba4c
                    [33] => #6fa634
                    [40] => #ff9595
                    [41] => #ff7575
                    [42] => #f46464
                )

)

)
classic

Foro

Comunicación robot Kuka con PLC Siemens

Super Globals

Options and Features

Partners

Suscríbete a la newsletter

abril 2024
L	M	X	J	V	S	D
« Ene
1	2	3	4	5	6	7
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28
29	30